7
Fit the screws and spacers to
the holes.
Note
Use a level to check whether the Wall-Mount Bracket
is level.
WW1
WS2
8
WM1
WW2
WS1
9
Pull out the arm of the bracket
to the end.
Preparing for the installation
of the TV
Make sure to attach the Table-Top Stand
before installing the TV to the wall by referring
to the Setup Guide.
1
Remove the screws from the
rear of the TV.
Note
Be sure to store the removed screws and unused
parts in a safe place, keeping them away from
children.
2
Attach the Wall-Mount
Attachment (supplied with the
TV) to the rear of the TV (to
make it parallel with the wall).
1.5 N·m
{15 kgf·cm}
Note
Be sure to fasten the Wall-Mount Attachment when
attaching them to the TV.
Use only a flat head screwdriver to install the
Wall-Mount Attachment. Use of another tool might
result in over torqueing the Wall-Mount Attachment
and damaging the TV.
− 11 (US) −
VS
US