Note
We recommend you to check the
position of TV in the viewing
environment.
2
3
Align
to the wall and
WM4
make four marks aligned with
the studs.
WM4
Note
Use a level to check whether
WM4
is level.
− 10 (US) −
4
Drill upper pilot holes on the
marks.
Note
Pilot holes must be drilled to a depth of 75 mm
(3 inch), using a 5.5 mm (7/32 inch) diameter drill bit.
5
Install
on the wall.
WM4
WW1
WS2
Note
Use a level to check whether
Precaution
Do not over-tighten the lag bolts
tightening could reduce the holding power of the lag
WS2
bolts
.
6
Drill lower pilot holes on the
marks. (Refer step 4 for the drill
instruction.)
75 mm
(3 inch)
5.5 mm
(7/32 inch)
Stud or Reinforcement
WM4
is level.
WS2
. Improper