Güde GAA 1000 Traduction Du Mode D'emploi D'origine page 15

Technical Data
Exhaust plant GAA 1000
Art. No ................................................................................55157
Service connection ..................................230 V~50 Hz
Motor output .................................................550 w (P1)
Suction output .............................................. 1000 m
Vacuum (underpressure) ...................................... 1000 pa
Suction hose.....................................................................2,4 m
Suction hose-Ø .........................................................100 mm
Chips collecting bag max. .......................................ca. 65 l
weight .....................................................................22,2 kg
noise and Vibration Information
Sound pressure level L ........................................74 db (A)
pA
Guaranteed sound power level L
Specified Conditions Of
Use
The chip extractor is convenient for exhausting chips from
milling, planning and cutting that are formed by mills,
table circular saws and planes. (Caution: not suitable for
wood dust during sanding).
Respecting technical data and safety precautions.Not
observing general regulations in force and instructions
from this manual does not make the manufacturer liable
for damages.
Power tool description
A canvas dust bag
b PVC-Chips collecting bag max.
C dust bag holder
d Motor
E ON/OFF switch
F frame
G Suction hose
Emergency procedure
Conduct a first-aid procedure adequate to the injury
and summon qualified medical attendance as quickly
as possible. Protect the injured person from further
harm and calm them down. For the sake of eventual
accident, in accordance with dIN 13164, a workplace
has to be fitted with a first-aid kit. It is essential to re-
place any used material in the first-aid kit immediately
after it has been used.
If you seek help, state the following pieces of infor-
mation:
1. Accident site
2. Accident type
3. Number of injured persons
4. Injury type(s)
Requirements for operating staff
/h
3
The operating staff must carefully read the Opera-
ting Instructions before using the appliance.
Qualification : Apart from the detailed instructions
by a professional, no special qualification is necessary
for appliance using.
minimum age : Persons over 18 years of age can
only work on the appliance. An exception includes
youngsters trained in order to reach knowledge
under supervision of the trainer during occupational
education.
....................83 db (A)
wA
Training : Using the appliance only requires corre-
sponding training by a professional or the Operating
Instructions. No special training is necessary.
The operator is responsible for accidents or risks to third
parties.
Symbols
warning! Caution!
Read the Operating Instructions!
before carrying out any work on the machi-
ne, disconnect the plug from the socket.
Protect against moisture
Never expose tool to rain.
Halten Sie Kinder und andere Personen
während der benutzung des Elektrowerk-
zeugs fern.
Cable pulling / transport prohibited
warning against dangerous voltage
Caution - hot surface!
Any damaged or disposed electric or
electronic devices must be delivered to
appropriate collection centres.
Protect against moisture
EnGLISH
15