Hopper Lid Hinges; Hopper Lid Handle - England's Stove Works 25-CB120 Manuel D'installation

HOPPER LID HINGES
The hopper lid is attached to the top of the stove by two removable hinges.
To remove the hopper lid hinges:
 Remove the (4) screws that hold each hinge in place, using a
 Re‐Install hinges in the reverse method.
HOPPER LID HANDLE
The hopper lid handle snaps into place in the opening in the hopper lid.
To remove the hopper lid handle:
 Lift the hopper lid up (in the open position).
 Press up on the bottom of the handle and it will pop out of place.
 To install new handle, insert at the top of the hopper lid and press down until handle snaps
into place.
IMPORTANT! READ AND FOLLOW ALL INSTALLATION AND MAINTENANCE INSTRUCTIONS, INCLUDING CLEANING THE UNIT AS SPECIFIED, AND
ENGLAND'S STOVE WORKS IS NOT RESPONSIBLE FOR ANY DAMAGE OR INJURY INCURRED DUE TO NEGLECT, OR DUE TO UNSAFE INSTALLATION OR
REPLACING GASKETS ANNUALLY, AND PARTS AS NEEDED.
USAGE OF THIS PRODUCT. CALL TECHNICAL SUPPORT WITH ANY QUESTIONS.
5
/
48
" socket.
16