CYBERPOWER GREENPOWER UPS™ TECHNOLOGY
GreenPower UPS™
CyberPower's GreenPower UPSTM Circuit Design is a solution to this "Power Loss." When the
Utility Power is operating normally, GreenPower UPSTM works in a Bypass Mode. Our GreenPower
UPSTM design conducts power only through the Relay and still provides normal output voltage.
Bypassing the transformer reduces power consumption thereby conserving energy and saving
money. When the utility power is abnormal the UPS will operate under Battery or AVR Mode. Under
this condition GreenPower UPSTM and a traditional UPS would operate about the same. On
average utility power operates 88% of the time and the CyberPower GreenPower Technology will
work in its money/energy saving Bypass Mode.
TECHNICAL SPECIFICATIONS
Model
Capacity (VA)
Capacity (W)
Input
Nominal Input Voltage
Input Voltage Range
Input Frequency Range
Output
On Battery Output Voltage
On Battery Output Frequency
Transfer Time (Typical)
Overload Protection
Surge Protection and Filtering
Lightning / Surge Protection
Physical
Output Receptacles
Dimensions (cm)
Weight (kg)
Battery
Sealed Maintenance Free Lead
Acid Battery
Hot Swappable External Battery
Warning Diagnostics
Indicators
Audible Alarms
Environmental
Operating Temperature
Operating Relative Humidity
Communication
PowerPanel® Business Software
Management
Self-Test
Auto-Charger/ Auto-Restart
COM/ Built-in USB Interface
SNMP/ HTTP Network Slot
PR750ELCDRT1U
750
600
50/60 Hz +/- 3 Hz (auto sensing)
Pure Sine Wave at 220/230/240Vac +/- 5%
On Utility: Circuit Breaker, On Battery: Internal Current Limiting
1U Rack, 43.3 x 4.4 x49.0
17.6
Power On, LCD Display (Using Battery, AVR, Load Level, Battery Level)
On Battery, Low Battery, Overload
32°F to 104°F (0°C to 40°C)
0 to 95% Non-Condensing
Windows 10 / 8 / 7 / Vista / XP / 2000, Server 2008 / 2003
8
PR1000ELCDRT1U
220Vac – 240Vac
160Vac – 290Vac
50/60 Hz +/- 1%
4 ms
Yes
(6) IEC 320 C13
6V / 9.0AH x 4
Yes
Manual Self-Test
Yes
Yes
Optional
1000
800
18