MIRKA AOS Mode D'emploi page 31

1
32 mm (1 / in.( 8,500 rpm Angle Orbital Sander )see "Product Configuration/Specifications" table for particular model(
4
to which this declaration relates is in conformity with the following standard)s( or other normative document)s( EN ISO 15744:2008. Following the
provisions of 89/392/EEC as amended by 91/368/EEC & 93/44/EEC 93/68/EEC Directives and consolidating Directive 2006/42/EC
Jeppo 28.03.2016
Place and date of issue
Operator Instructions
Includes – Please Read and Comply, Proper Use of Tool,
Work Stations, Putting the Tool Into Service, Operating In-
structions, Product Configuration/Specifications Tables, Parts
Page, Parts List, Trouble shooting guide.
Manufacturer/Supplier
Mirka Ltd.
FI-66850 Jeppo
Finland
Tel: + 358 20 760 2111
Fax: +358 20 760 2290
Recommended Airline
Size - Minimum
10 mm 3/8 in
Declaration of conformity
Mirka Ltd.
FI-66850 Jeppo, Finland
declare on our sole responsibility that the product
Company
Important
Read these instructions care-
fully before installing, operating,
servicing or repairing this tool.
Keep these instructions in a safe
accessible location.
Required Personal Safety Equipment
Recommended Maximum
Hose Length
8 meters 25 feet
28
Mirka 8,500 rpm
AOS 32 mm (1 1/4 in.)
Stefan Sjöberg, CEO
Safety Glasses Breathing Masks
Safety Gloves Ear Protection
Air Pressure
Maximum Working Pressure
Recommended Minimum
6.2 bar 90 psig
NA NA
Original Instructions