Drain Pump - Thermador DWHD650W Serie Guide D'utilisation Et D'entretien

Drain pump

Large food remnants in the rinsing water not retained by
the filters may block the waste water pump. In this case:
WARNING
9
Use caution when removing parts for cleaning as
some debris may be sharp.
Disconnect the appliance from the power supply.
1.
Take out upper rack
12
2.
Remove the filters
1b
3.
Scoop out standing water - use a sponge if necessary.
4.
Using a spoon, pry off the pump cover (as shown) until
5.
it clicks, then grip the cover and pull upward until it
resists and then pull forward (1). Remove cover
completely.
Check inner compartment and remove any foreign
6.
objects.
WARNING
9
Use caution when removing parts for cleaning as
some debris may be sharp.
36
and lower rack .
9"
.
Place pump cover in the original position (2) and
7.
press down until it engages (3).
Place cover in the original position, press down and
8.
engage.
Reinstall filters.
9.
Re-insert racks.
10.
Note: The drain pump will not work properly if the drain
pump cover is not snapped in completely until it clicks.