Declaraţie De Conformitate Ce; Construction Characteristics - STERWINS EDWC-3 Mode D'emploi

DECLARAŢIE DE CONFORMITATE CE
59790 Ronchin - France
Declarăm faptul că produsul:
SISTEM DE AUTOMATIZARE EDWC-3, EDWC FR-3
respectă cerinţele următoarelor directive ale Consiliului:
Directiva 2014/35/UE privind tensiunea joasă
şi este conform cu următoarele norme:
EN 60730-1:2000+A1+A2+A12+A13+A14+A16
EN 60730-2-6:2008
Nr. de serie: Vă rugăm consultaţi coperta de pe verso.
RO
Ultimele douã cifre ale anului în care
s-a aplicat marcajul CE: 17
ADEO Services
135 rue Sadi Carnot
CS 00001
04/01/2017
Bruno POTTIE
Director Achiziþii
Internaþionale
ADEO SERVICES
56
OPERATION
The electronic controller orders the automatic start and stop of the water pump when
opening or closing any tap or valve of the installation. When the water pump starts, it keeps
running while it exists any tap opened in the system, giving a constant flow an pressure to the
network.
CAUTION!
This electronic controller unit can be used either for drinking water or
non-drinking water circuits. In installations where both type of water are
present, make sure that drinking water is not mixed with non-drinking water.

CONSTRUCTION CHARACTERISTICS

Inlet male 1"
Outlet male 1"
Special non return valve which avoids surges.
Security system avoiding the possibility for the machine to work without water.
Manual start switch(RESET).
Tension LED(POWER).
Pump-working LED(ON).
Security system LED(FAILURE).
Extension socket-outlet for motor connection.
Cable with plug connector for mains connection.
TECHNICAL CHARACTERISTICS
Rated voltage: 230V~
Max. Current: 10A
Frequency: 50Hz
Degree of protection: IP65
Max. temperature of water: 60°C
Max. pressure for use: 10bar
57
EN