FAAC E145 Guide Rapide page 14

Display Basic Function
Br
SLIDING LEAF BRAKING (only displayed with the
function):
00
= braking disabled
10
= maximum braking time
Cd
LEAF CLOSING DELAY (only displayed with the
Can be adjusted from
bu BUS-2EASY DEVICE REGISTRATION:
1. Register: keep
flashes during this time).
Y
2. will appear once confirmation of the completed registration is given.
3. Release
the display.
Opening and
closing photo-
cells:
ON = registered
and committed
M2
MOTOR 2 dead-man DRIVE mode (only displayed with the
function):
+/R1
OPENS (displaying
-/R2
CLOSES (displaying
M1
MOTOR 1 dead-man DRIVE mode:
+/R1
OPENS (displaying
-/R2
CLOSES (displaying
tL WORK TIME LEARNING OPERATIONS (SET UP):
Refer to the relative paragraph.
E145
00 3
to minutes.
-
+
and pressed simultaneously for at least 5 s (the display
-
+
and . The status of the BUS-2EASY devices will appear on
Opening
and closing photocells:
Closing photocells:
ON = registered and committed
oP
) for as long as the button is pressed
cL
) for as long as the button is pressed
oP
) for as long as the button is pressed
cL
) for as long as the button is pressed
CF
Mn
=
ON = registered and committed
Encoder 1: ON = connected and
registered correctly
BUS Status:
Always ON
Encoder 2: ON =
connected and
OPEN Photocell:
ON = registered and committed
5
Default
2 CF PC
= or =
2
function):
registered
correctly
Mn 2
=
732783 - Rev.D
05
05
no
--
--
--