1
Safety Guidelines
1.
Follow the installation instructions.
2.
Use the appliance
• according to its intended use
• in good condition
• with due regard to safety and risk of danger.
3.
Note that the appliance is exclusively for use in the
applications detailed in these installation instructions
(see 2 Technical Data). Any other use will not be
considered to comply with requirements and would
invalidate the warranty.
4.
Please take note that any assembly, commissioning,
servicing and adjustment work may only be carried
out by authorized persons.
5.
Immediately rectify any malfunctions which may
influence safety.
2
Technical Data
Media
Medium:
Connections/Sizes
Connection size:
Pressure values
Max. operating pressure:
Maximum pressure
difference between hot and
cold inlet supplies:
Operating temperatures
Max. hot water inlet
temperature:
Setting range:
Control accuracy:
Specifications
Flow rate at 1.0 bar pressure
differential across valve:
Installation position:
3
Options
For Options visit homecomfort.resideo.com/europe
4
Assembly
4.1 Installation Guidelines
•
Install without tension or bending stresses
•
Fit a return flow-retarder unit where the hot water
supply system includes a circulation circuit
•
Observe the flow direction arrow when fitting a return
flow-retarder unit
MU1H-1326GE23 R0420
Drinking water
3
G
/
"
4
max. 10 bar
2.5 bar
90 °C
30 - 60 °C
<±4 K
appr. 25 l/min
Arbitrary
GB
•
To prevent the growth of legionella, DVGW-W551
specify that the water volume in the pipework between
the mixer valve and the furthest take-off point should
not exceed 3 litres. This corresponds to a maximum
length of 10 metres for
1
17 metres for
/
2
•
Requires regular maintenance in accordance with
EN 806-5
4.2 Setting
H
MIX
Mixing valve
Setting range:
Turn the adjuster knob until the temperature setting number
aligns with the index mark.
C = Cold water
H = Hot water
MIX= Mixed water
5
Disposal
Observe the local requirements regarding correct waste
recycling/disposal!
6
Accessories
For Accessories visit homecomfort.resideo.com/europe
3
3
/
" (20 mm) pipework and
4
" (15 mm)
C
C
MIX
Diverter valve
TM50-1/2E only
30 °C - 60 °C
H