Ribimex Ribitech PRBAT20 Mode D'emploi page 33

V. OPERATION
5.1- Intended use
- The product is intended for domestic use (indoor or under shelter).
- The product is intended for grinding or polishing diverse types of materials (e.g. metals, marble,
plaster ...) by using the appropriate accessory.
- Do not use the grinder for working on products containing asbestos or other toxic or hazardous
materials.
- Do not use the tool for purposes not appropriate (eg cutting of products containing hazardous
materials ...), or for any use not described in this manual.
- Any other use different from that indicated in these instructions may cause damage to the tool and
present a danger to the user.
- DO NOT use nor mount on the tool accessories that are not recommended by the manufacturer.
- The tool is not intended for artisanal, commercial, professional and/or industrial use.
- Do not use other types of disks other than those recommended by the manufacturer to avoid a hazard
- The manufacturer or seller cannot be held responsible for incorrect or non-compliant use of the tool.
5.2- Operation
Note: Before first use, charge the battery.
1. Ensure that battery is fully charged.
2. Wear appropriate protective equipment.
3. Insert compatible disk.
4. Prepare material for work
5. Secure material if necessary.
Do not use your own weight or body to hold material.
6. Firmly hold tool to avoid kickbacks. Always maintain a balanced and secure position.
7. Place disk on workpiece. Do not make sudden movements.
8. Press on the switch to start operation.
Note: never touch or grasp the disk during operation.
9. Once work is finished, stop product by releasing the switch.
Note: do not put down product until the disk has completely stopped rotating.
Tips:
- Do not apply to much force on tool that could slow down the disc.
- To trim in an effective way, use trimming discs at a 30° to 40° angle to the material.
- For polishing: polish the surface in even circular motions.
WARNING! Do not become careless in assuming your knowledge of the tool.
DO not be filled (over repeated use) with a sense of ease and familiarity with the tool, neglecting strict
compliance to the safety instructions given with the tool.
Improper us of the tool or failure to comply with the provided safety instructions in this manual can
cause severe injury.
Remember that a split second of negligence is enough to cause serious damage.
Stay alert for your surroundings and especially for any danger that you may not hear while using the
tool.
Page 33 / 55