Specifications - Sony HT-CT370 Mode D'emploi

Specifications

Bar Speaker (SA-CT370, SA-CT770)
Amplifier section
POWER OUTPUT (rated)
Front L + Front R: 50 W + 50 W
(at 4 ohms, 1 kHz, 1% THD)
POWER OUTPUT (reference)
SA-CT370:
Front L/Front R: 100 W (per channel at 4 ohms, 1 kHz)
SA-CT770:
Front L/Front R: 105 W (per channel at 4 ohms, 1 kHz)
Inputs
HDMI IN 1/2/3*
ANALOG IN
DIGITAL IN (OPT (TV))
* These 3 jacks are identical. Using any of them makes no difference.
Output
HDMI OUT (TV (ARC))
BLUETOOTH section
Communication system
BLUETOOTH Specification version 3.0
Output
BLUETOOTH Specification Power Class 2
Maximum communication range
1)
Line of sight approx. 10 m
Maximum number of devices to be registered
9 devices
Frequency band
2.4 GHz band (2.4000 GHz - 2.4835 GHz)
Modulation method
FHSS (Freq Hopping Spread Spectrum)
Compatible BLUETOOTH profiles 2)
A2DP (Advanced Audio Distribution Profile)
AVRCP 1.3 (Audio Video Remote Control Profile)
Supported Codecs 3)
4) 5)
SBC , AAC
Transmission range (A2DP)
20 Hz - 20,000 Hz (Sampling frequency 44.1 kHz)
1) The actual range will vary depending on factors such as obstacles
between devices, magnetic fields around a microwave oven, static
electricity, cordless phone, reception sensitivity, operating system,
software application, etc.
2) BLUETOOTH standard profiles indicate the purpose of BLUETOOTH
communication between devices.
3) Codec: Audio signal compression and conversion format
4) Subband Codec
5) Advanced Audio Coding
Front L/Front R speaker section
Speaker system
SA-CT370: Full-range speaker system, Acoustic suspension
SA-CT770: 2-way speaker system, Acoustic suspension
Speaker
SA-CT370: 60 mm cone type
SA-CT770: 60 mm cone type woofer
20 mm balance drive tweeter
Rated impedance
4 ohms
continued
25
GB