Complete Set - Bort BSS-1600-P Mode D'emploi

EN
Vacuum Cleaner
DEAR CUSTOMER!
Congratulations on the purchase of BORT product,
which has progressive design and high quality. We
hope that our products will be your companion for
many years.
For the effi cient and safe use of the product, please
read this manual and save it for future reference.
SPECIFICATIONS
MAINTENANCE INSTRUCTIONS
1. Handle
2. 2-in-1 Tool
3. Air Escape Pushbutton
4. crevice Tool
5. Hose
6. Release Button
7. Telescopic Tube
8. Floor brush
9. Handle Of Dust
10. Release Button Of Dust
11. Cyclone dust container
12. Switch Pedal
13. Tube Support
14. Power plug
15. Cord reeling pedal
ATTENTION: All schematic pictures may differ from the
actual product

COMPLETE SET

Standard complete set of the product includes:
Vacuum Cleaner
Hose
Telescopic tube
Crevice nozzle
Multi brush
Brush for upholstery and carpets
Owner's manual
Due to the constant improvement of the technical
characteristics of the models, we reserve the right to
make changes in construction and/or complete set of
product.
SAFETY AND SECURITY
1.Be sure to use the cleaner in compliance with the
contents of this manual, and use the fi ttings designated
by the manufacturer.
2. Please do not leave the cleaner when it is powered
on. Turn off the power switch and pull out the power
plug when not using or before maintenance.
6
1
2
3. Please do not pull or carry the cleaner by the power
cord, or nip it when closing a door; keep the cord free
from the press of the cleaner.
4. Please do not let children take the cleaner as a toy,
and close attention is necessary when the cleaner ap-
proaches children.
5. Please do not use the cleaner when its power cord or
plug is damaged. Send it to the appointed service cent-
er. Please do not unplug by pulling the cord or plug. To
unplug, grasp the plug, not the cord.
6. Never pull the power plug or use the cleaner with
wet hands.
7. When using the cleaner, pay attention to prevent any
hair roll or other rubbish block up the air inlet (includ-
ing the hose and the spile), otherwise motor failure and
housing distortion may be caused. If the matters ab-
sorbed in forms a blockage, stop the cleaner by pulling
out the power plug immediately to clean the blockage.
8. When using the cleaner, don't plug up the air outlet
by towel or other matters, otherwise the effi ciency of
dust absorbance will be infl uenced, and the motor will
be at high risk of being burnt out.
9. Never use the cleaner at uneven fl oor or ground;
and be very careful when cleaning stairs to prevent the
cleaner from falling down.
10. Never absorb live stumps with the cleaner, other-
wise the motor may be damaged.
11. The cleaner should be kept far away from heat
sources (such as central heating, oven, etc) to avoid
the distortion of plastic parts as well as the infl uence
caused by such distortion.
12. Before using the cleaner, please remove big and
sharp matters on the fl oor to avoid damaging the plas-
tic parts, fi lter gauzes and motor.
13. Never absorb water or other liquid with this cleaner,
otherwise, the motor will be damaged.
14. This appliance is not intended for use by persons
(including children), with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
edge, unless they have been given supervision or in-
struction concerning use of the appliance by a person
responsible for their safety.
ASSEMBLY INSTRUCTIONS
1. Before assembling the cleaner, please confi rm all
parts and components for the cleaner are received by
referring to Parts and Components List.
2. Please remember to cut off the power supply before
assembly.
ASSEMBLY OF HOSE
1. Insert the hose (5) into the duct inlet of the machine
body in horizontal direction. Please pay attention to the
alignment of two projecting parts. Turn the hose right
when it is pushed into the bottom, a click of inserting
sound may be heard, i.e. the hose is assembled into
the machine body completely.