Control Panel - HK Audio PREMIUM PR:O MOVE 8 Manuel

2.1 Control Panel

• Channel 1 and 2
●
1
Input Mic/Line
Use this balanced combo input [XLR/ 1/4" (6.3 mm)] to patch in a
microphone or line signal.
●
2
Volume
The Volume control adjusts the level of the signal sent to Channels 1 and
2. Please note that you will have to adjust the level when switching from
microphone to line signals.
●
3
Treble
This rotary knob adjusts the input signal's high frequencies.
●
4
Bass
This rotary knob adjusts the input signal's low frequencies.
●
5
Reverb
The Reverb knob controls the amount of signal sent to the internal reverb
eff ect.
• Channel 3
●
6
Input Instrument
Use this unbalanced 1/4" (6.3 mm) jack to connect an instrument with a
high-impedance output such as a guitar or guitar eff ects device.
●
7
Volume
The Volume control adjusts the level of the signal sent to Channel 3. Please
note that if you patch in a line signal, its high level may cause distortion. If
you connect a line-level device such as a keyboard, guitar eff ect device or a
preamp, you may have to back off the connected device's output level.
●
8
Treble
Use this rotary knob to adjust the input signal's high frequencies.
●
9
Bass
Use this rotary knob to adjust the input signal's low frequencies.
●
10
Reverb
The Reverb knob controls the amount of signal sent to the internal reverb
eff ect.
●
11
Guitar Cab Simulation
This button switches on the Celestion Impulse Response guitar cabinet
simulator when you wish to use guitar eff ect devices and preamps. Its LED
indicator lights up green when the simulator is on.
Heads up: MOVE 8 does not feature amp modeling. Instead, the cabinet
simulator authentically recreates the sound of a guitar cabinet. This lets
you use battery-powered fl oor eff ects, guitar modelers and the like that
are usually connected to the clean channel of an electric guitar amp.
The free MOVE 8 REMOTE app off ers three types of Celestion loudspeakers:
• Celestion Greenback
• Celestion Blue
• Celestion Vintage 30
The factory default is the Celestion Greenback.
• Channel 4
●
12
Volume
This knob adjusts the level of the Bluetooth signal and that of the signal
sent to the rear Aux In jack.
Heads up: The MOVE 8 REMOTE app also provides two tone controls for
Channel 4.
●
13
Pairing
This button activates the pairing process that connects MOVE 8 to
Bluetooth-enabled devices so you can stream audio and/or control the
device remotely via the MOVE 8 REMOTE app. The blue LED indicator
alongside the button lights up continuously when a Bluetooth connection is
active. See section 4, Bluetooth, for more on this.
●
14
Master
This knob determines MOVE 8's overall level. We recommend making a
habit of turning it all the way down to the far left before powering up the
device.
MOVE 8 1.1
5