Shimano Steps E6000 Série Mode D'emploi page 80

< BT-E8020 >
• For the purposes of demonstration, these instructions take as an example a frame design where the battery is removed/
installed from below.
• If using a battery cover manufactured by another company, remove the battery cover before removing the battery.
1.
Remove the keyhole cap.
2.
Insert the key into the key cylinder in the battery
mount.
• The position of the key does not affect the insertion of the
battery. You can insert it regardless of the key position.
• You cannot remove the key when it is not in the inserting
position.
3.
The battery detaches automatically when the key is
turned clockwise and pushed in.
Support the battery with your hand when detaching to make
sure that it does not fall out.
NOTE
Key hole cap
Key cylinder
Key
21