2. PREPARE THE INSTALLATION
Cut-out the openings for duct (A) and power cable (B), in cabinet or wall, according to the direction of discharge
chosen.
See figures below.
NOTE: If using the optional adaptor 3¼" x 14" to 3¼" x 10" model #T461, the duct opening width
(A on figures below) will be 10½", centered.
H
ORIZONTAL DISCHARGE
3. PREPARE THE HOOD
3.1 Pull latch tabs and remove filters from the hood.
3.2 Remove the 5 screws retaining the bottom panel to the hood and
set aside. Pull out the bottom panel.
3.3 Punch out the appropriate electrical knock-out hole.
(CONT'D)
!
V
ERTICAL DISCHARGE
CABINET BOTTOM
C L
A
4¼''
7¼''
7/8''
HD0120A
HD0107
HO0030
- 5 -
1½''
1³ ''
8
2''
B
2''
7¼''
SCREW
LOCATIONS