Prepare The Hood - Broan Elite RMPE Serie Mode D'emploi

PREPARE THE HOOD

Unpack hood and check contents.
You should receive:
1 - Hood
1 - Parts Bag (B080810168) containing:
4 - Mounting Screws (3,2 x 13mm)
1 - Installation Instructions
EXTERIOR OR IN-LINE BLOWER SELECTION
CAUTION: Either an exterior blower or in-line blower may be used with this hood.
The RMPE hood must be installed with blower models 331H, 332H, 335, 336, HLB3,
HLB6, HLB9 or HLB11 only. Other Blowers cannot be substituted (Blowers sold
separately).
The blower must be UL listed for Canadian and U.S. use, and evaluated for use with
solid state speed control, rated 120V, 60 Hz, 6.0 A max.
4 MOUNTING
SCREWS
- 4 -
(3,2 x 13mm)