Installation
compatibility
and operational safety
The SQlab Innerbarends® are designed for
the assembly on standard bicycle handle
bars, with a handle clamping diameter of
22.2 mm.
eBike Ready
SQlab products bearing the „eBike Ready" rating are suitable for use on pedelecs from the point of view of function, ergonomics and
operational stability (in accordance with the standards DIN EN ISO 4210 and DIN EN ISO 15194).
Exchange of the Innerbarends® on Pedelec25
Ebikes and pedelecs with CE mark and pedal assistance up to 25 km/h are covered by the Machinery Directive, therefore components of
these bicycles may not be easily exchanged or modified. In order to clarify the situation, a guideline for replacing Ebike/Pedelec 25 parts
has been jointly released by the associations ZweradIndustrieVerband (ZIV) and Verbund Service und Fahrrad (VSF) in cooperation with
the ZedlerInstitut and the Bundesinnungsverband Fahrrad (BIV).
What bicycle dealers and workshops are allowed to modify on these vehicles and for which components they need to obtain the approval
of the vehicle manufacturers or the system provider, is clearly regulated by guidelines and can therefore be used as a recommendation
for action.
An exchange of the Innerbarends® on Pedelec25 is possible on the basis of the recommendation for action „Guidelines for the exchange
of components with CEmarked Ebikes/pedelecs with pedal assistance up to 25 km/h" (https://www.zedler.de/files/kunde/prueftech
nik/PDF/Leitfaden_Bauteiletausch_Stand_140620162.pdf) of the associations ZweiradIndustrieVerband (ZIV) and Verbund Service
und Fahrrad
(VSF) in cooperation with the ZedlerInstitut and the Bundesinnungsverband Fahrrad (BIV), provided that they are forward facing and the
load distribution is not seriously changed.
On our website www.sq-lab.com/service/downloads/ in the service area under Downloads you will find a document called eBike Ready.
There you will find detailed information about the component exchange on Pedelec25, as well as the guide for the component exchange
made by the associations ZweiradIndustrieVerband (ZIV), Verbund Service und Fahrrad (VSF), the Zedler Institute and the Bundesin
nungsverband Fahrrad (BIV).
Exchange of the Innerbarends® on Pedelec45
A component exchange of the Innerbarends® on fast pedelecs, socalled SPedelec, which are classified as motor vehicles and are sub
ject to EU Directive 2002/24/E6 or EU Regulation No. 168/2013, is not possible based on the guideline „Component exchange at SPe
delecs fast ebikes / pedelecs with pedal assistance up to 45 km/h" of the associations Zweirad Industrie Verband (ZIV ) and Verbund
Service und Fahrrad (VSF) in cooperation with the ZedlerInstitut and the Bundesinnungsverband Fahrrad (BIV).
On our website www.sq-lab.com/service/downloads/ in the service area under Downloads you will find a document called eBike Ready.
There you will find detailed information about the component exchange on Pedelec45, as well as the guide for the component exchange
made by the associations ZweiradIndustrieVerband (ZIV), Verbund Service und Fahrrad (VSF), the Zedler Institute and the Bundesin
nungsverband Fahrrad (BIV).
Warning
As a result of nonmatching Hand
lebar and innerbar end tolerances it
may come that, the innerbarends can
not be adequately secured to prevent
twisting and lateral movement. In
case of problems please contact your
SQlab dealer.
Warning
Always follow the instructions and
warnings, provided by your handle
bars mounting and operating instruc
tions.