brush or a soft brush. Even a vacuum cleaner can be recommend-
ed.
External cleaning of the housing can be carried out using a soft, pos-
sibly moist cloth. While doing so, a mild detergent or other suitable
cleansing agent can be used. Do not use solvents or cleansing agents
containing alcohol (e.g. benzene, cleaning alcohol, etc.) as these can
corrode the plastic housings.
9 Disposal
Please do not dispose of the device in domestic waste! The device
contains valuable substances that can be recycled. If you have any
questions about this, please contact your local waste management
enterprise or other corresponding municipal facilities.
10 EU declaration of conformity
We declare that the designated products meet
the requirements of the following EU directives:
EU Low Voltage Directive
DIN EN 61029-1 / 12.2003
DIN EN 61029-2-9 / 07.2003
EU EMC Directive
DIN EN 55014-1 / 09.2002
DIN EN 55014-2 / 08.2002
DIN EN 61000-3-2 / 12.2001
DIN EN 61000-3-3 / 05.2002
EU Machinery Directive
DIN EN 61029-1 / 12.2003
DIN EN 61029-2-9 / 07.2003
15.03.05
Dipl.-Ing. Jörg Wagner
PROXXON S.A.
Machine Safety Department
73/23/EWG
93/68/EWG
89/336/EWG
98/37 EWG
- 15 -