Publicité
Les langues disponibles
Les langues disponibles
Technical data
Type
Supply voltage
Capacity
Protection class
Thermostat
Dimensions
Weight
General safety instructions
1. Before using the machine, carefully read this entire
instruction manual.
2. Before using your new heater, check it, including cord
and plug, for any visible damage. Do not use a
damaged heater, but send it back to your dealer for
replacement.
3. This heater has been designed to hang securely from
the wall: the outlet opening has to point downwards.
Do not use it until it has been properly installed, as
described in these instructions for use and never, for
example, in a standing position or when leaning
against something.
4. This heater is strictly intended for normal domestic
use. Only use it as an additional heater in your home.
5. Under the terms and conditions described in this
leaflet, the heater can be used in wet or damp indoor
spaces such as bathrooms and laundry rooms (IPX2).
Do not place the heater in the vicinity of taps, bathtub,
shower, pool, fountains or other sources of moisture
(↔ > 0,6 m.). Make sure it cannot fall into water, Also
make sure that it cannot come into contact with jets of
water, splashes, etc. and prevent water from getting
into the heater itself. If, at any time, the heater does
fall into water, unplug it immediately! Do not use a
heater that has a damp interior but have it repaired.
Never immerse the heater, cord or plug in water and
never touch it with wet hands.
6. The supply voltage and utility frequency, specified on
the machine, need to match those of the socket that is
used. The electrical installation needs to be protected
by a residual current device (max. 30 mAmp).
English
SANI-FANHEAT 2000
Volt/Hz
220-240 / 50
Watt
1000/2000
IPX2
+
cm
17,5 x 25 x 29
kg
1,7
17
Publicité
