Special Functions - Lupine Betty R Manuel D'utilisation

5

Special Functions

Additional beams for special applications:
Changing the factory-set SOS function
It is possible to change the factory-set SOS signal to
different brightness levels, or to special-purpose RVLR or
Alpine Emergency signals.
1.
Press and hold the button
until 2 green
release the button

2.
The range of brightness levels you can select will
automatically begin
3.
Press the button when the brightness level you
want is presented.
Depressing the button for 3 seconds will initiate
the flash mode selected, and the lamp will
continue flashing in that mode until the battery
is completely discharged.
* If in use, shown by green LED
** Will not be signalised by status LED
In special version with XP-E2 LED 0.8W
42 Betty R
see page 35.
LEDs light up.
to cycle, as shown.
1 W
brightness level
2 W
brightness level
4 W
brightness level
8 W
brightness level
12 W
brightness level
16 W
brightness level
22 W
brightness level
28 W
brightness level
34 W
brightness level
45 W
brightness level
SOS*
RVLR*
Alpine SOS*
Flash*
0.3W Center-LED **
Default setting