Lupine Betty R Manuel D'utilisation page 36

3
Operation
Lamphead display:
The remaining capacity will be shown in detail on any Lupine Smartcore battery (see
page. 33). Additionally, the LEDs on the back of the lamp-head change color to indicate
decreasing voltage. When battery voltage drops below a certain level, the Backlight LED
changes from blue to green. Near the end of the battery's charge, the light turns red.
At 16W to 45W At 1W to 12W LEDs blue or green
LEDs blue or green
1 up to 5 blue LEDs 1 up to 5 green LEDs
Backlight blinks red
Backlight red
Backlight blue Backlight green
Low
Very low
capacity
capacity
Safe power
Use low light!
Reduce speed!
LED display Bluetooth remote:
Remote blue Remote green Remote red
Remote blinks
red
Use low light!
Reduce speed!
36 Betty R