Special Functions - Lupine PIKO Manuel D'utilisation

Special functions

Activate diffuse light / SOS:
To activate diffuse light or SOS (depending on the programming), keep the button of the
lamphead pressed until it lights up red once, let go immediately. The light setting is activated.
You choose and setup the diffuse light or SOS further down in the programming.
Programming diffuse light on/off:
The diffuse light level can be activated or deactivated in the respective light program.
Example: When it's deactivated the default light setting would only light with 20W and 6W.
Stealth:
The LED indications will be reduced to a minimum. For example, there's no voltage display
after connecting the lamphead to the battery.
Autostart after power interruption:
When the power is interrupted/disconnected and current flows again, the lamp lights up in
the last used light level without having to switch it on manually.
Example: If the battery is disconnected from the lamp while it's on and the battery is recon-
nected, it will light in the last used light level.
2 4 Piko
RVLR: (3-step RVLR)
This mode includes an additional slow flash mode.
Start with lowest beam:
The lamp will not start at maximum power as by default, but at the lowest stage.
Doubleclick:
The lamp may only be switched on with a quick double click. Useful for anybody who wants to
avoid that the lamp is switched accidentally in particular during transport
(e. g. in a backpack).
Reset:
Resets the lamp to default setting.
Special functions
Piko 25