Lupine Betty R Manuel D'utilisation page 43

Alternative Capacity Indicator (lamp-head):
1.
Before activating the alternative capacity indicator,
your battery must be
2.
Press and hold the button
until 3 green
release the button

3.
The range of battery capacities you can choose
from will start automatically.
You must approximate the correct range for your
battery; e.g., for an 13.2Ah you would select 14 Ah
(1 red LED)
Similair to our Smartcore batteries the

on the lamphead will now approximatley show the
remaining capacity.
Attention! When the lamp-head is disconnected
from a battery, the indicator will not work correctly
until the battery is fully recharged.
fully charged.
LEDs light up.
red LEDs
2 Ah
3 Ah
4 Ah
5 Ah
6 Ah
7 Ah
8 Ah
9 Ah
10 Ah
12 Ah
14 Ah
16 Ah
18 Ah
20 Ah
Disable indicator
5
Betty R 4 3