Programming Pour Size Setting; Disposal Information - K-FEE TWINS II & LATTE Manuel D'utilisation

Programming pour size setting

manufacturer
setting range
Buttons
setting
(fl oz / ml)
(fl oz / ml)
1.0 – 1.5 /
1.0 / 30
30 – 45
7.1 – 10.1 /
10.1 / 300
210 – 300
1.7 – 7.1 /
5 / 150
50 – 210
1.7 – 7.1 /
4.6 / 135
50 – 210
Switch the appliance on and place the
1
required cup under the spout.
Lift the handle and insert the required
2
pod. Reclose the handle.
2
PROHIBITED: Do not reach
inside – injury hazard.
30
Now press and hold the desired bev-
3
earge button for at least 3 seconds to ac-
tivate programming. Release the button.
The cup will now be filled up with liquid.
Once the desired level has been reached,
press the button again to automatically
save this new setting.
3 min. 3 sec
Stop
WARNING: Very hot water –
scalding hazard.
NOTE: To reset the pour size
setting back to the manufac-
turer recommended setting,
see page 27.
Specifications / Service
120 V, 60 Hz, max. 1700 W
39. 4 in / 1 m
P
max. 19 bar
approx. fl oz 77.7 / 2.3 l
approx. lbs 10.4 / 4.7 kg
A = approx. 13.8 in / 350 mm
B = approx. 12.9 in / 328 mm
C = approx. 11.0 in / 280 mm
13.8 in / 350 mm with open lever
max 5.9 in / 150 mm
50 °F – 113 °F / 10 °C – 40 °C
199 °F / 93 °C

Disposal information

The packaging is recyclable. Ask the department responsible in your local council offices
for further information about recycling.
The appliance contains valuable materials which can be recycled and reused. For
this reason, contact your local waste management recycling centre for correct
disposal.
INFO:
We recommend that you re-
tain the original packaging
so that you can return your appliance
to an authorised customer service if it
ever needs repair.
No guarantee is provided for any da-
mage caused by transport in unsuitable
packaging.
Contact us if you
have any questions or suggestions:
BATES Enterprises South
1315 Upper Asbury Ave
Charlotte, NC 28206
USA
Hotline (+1) 833-475-9113
e-mail: customer_service@k-fee.us
31