Krups XP6025 Mode D'emploi page 5

KR_ESPRESSO_XP6025_NAFTA_8080011600-02 03/07/12 17:49 Page7
n
Ensure that the mains voltage corresponds to that marked on the appliance's name
plate.
n
To prevent excessive load on the electricity network, do not connect other high
consumption appliances on the same circuit.
n
Check that the power cord is in perfect condition before each use.
n
Never pull the power cord or the appliance itself to disconnect the appliance.
n
Never leave the appliance unsupervised when connected.
n
If the power cord should become damaged, it must be replaced by a professional from
an Approved Service Center to avoid any danger.
n
In the event of a fault or malfunction, do not try to repair the appliance yourself, leave
this to a professional from an Approved Service Center.
n
This appliance has been designed for domestic use only. Any misuse of the appliance
cancels the guarantee and could release the manufacturer from any liability.
n
Do not use appliance for other than intended use.
n
To disconnect, stop the appliance with the button, then remove plug from wall outlet.
SAVE THESE INSTRUCTIONS
This appliance is designed for domestic use only. Any maintenance other than
cleaning and normal upkeep of the appliance by the owner should be performed by
Krups approved personnel only. Visit our website www.krupsusa.com in the USA
or www.krups.ca in Canada, or contact customer services for your nearest service
center. To reduce risks of fire and electric shock, do not dismantle the base of the
appliance. All repairs should be performed by Krups approved personnel only.
INSTRUCTIONS FOR A SHORT POWER CORD
A. A short power supply cord is provided to reduce risk resulting from becoming
entangled in or tripping over a longer cord. The use of an extension lead is not
recommended with this appliance.
B. If an extension lead is absolutely necessary, it may be used if care is exercised
in their use.
1) The extension lead must have at least the same rating as that of the machine.
2) The extension lead must not hang over the table or counter where it could be
pulled by a child or trip someone.
C. This appliance is equipped with a polarized plug (one blade is wider than the
other). To reduce the risk of electric shock, there is only one way to insert the
plug into the socket. If it does not fully fit into the socket, reverse the plug. If it
still does not fit, contact a qualified electrician. Under no circumstances should
the plug be changed.
In order to improve its products, Krups reserves the right to modify specifications without
prior notice.
NOTE
English
7