Krups XP6025 Mode D'emploi page 19

KR_ESPRESSO_XP6025_NAFTA_8080011600-02 03/07/12 17:49 Page21
n Clean the outside of the plastic tube of the nozzle with hot water.
n If necessary, unblock the internal steam duct by inserting the needle supplied (t) into the nozzle hole and
running some hot water or steam through the plastic tube (See sections "Hot water function" page 15
or "Steam function" page 15).
n Ensure that all parts are completely dry.
n We also recommend that you use this needle to unblock the holes in the filters and the small hole at
the top of the detachable metal steam foam nozzle (fig 10).
n Carefully fit the special cappuccino nozzle by positioning the pins in the holes and rotating them anti-
clockwise until they lock into place (fig.11).
IMPORTANT
These operations are essential to prevent any risk of spreading micro bacteria.
Cleaning the water tank
n Remove and clean the water tank every day. Rinse with clear water and re-position ensuring that it is
correctly lodged in its housing.
n If a layer of limescale should form on the tank walls, descale using a mixture of water and white vinegar.
Leave to rest for 1 hour.
n Wipe with a non-abrasive sponge and rinse thoroughly.
Cleaning the cup rest grill
n Remove the cup rest grill by moving it upwards. (fig.12).
n Wash with warm soapy water.
n Rinse and dry carefully.
Cleaning the water drip tray
n Remove the water drip tray by sliding it forwards (fig.13).
n Remove the cup rest grill (fig.12).
n Clean under warm water and dry thoroughly.
IMPORTANT
The water level indicator can be removed and re-attached using the clips.
n Clean the stainless steel cover using a non-abrasive slightly damp cloth. Dry.
n Re-assemble the tray .
n Reposition the cup rest grill.
Cleaning the appliance body, the cup warming plate
These parts of the appliance are cleaned using a non-abrasive and slightly wet cloth.
Important
Take care not to allow water on the control panel.
Any other servicing should be performed by an authorized service representative.
Important
Do not pour an espresso into a cup that is cold. This will cause the temperature of the espresso to
cool too quickly. It is recommended that you turn on your machine 10 to 15 minutes before making
the espresso and rest the cups on the cup warming plate. It heats up quickly and reaches a
temperature that is sufficiently high enough to heat the cups quickly and efficiently.
English
21