System And Operation; System Description; Operation; Push Buttons - SubGear XP10 Mode D'emploi

II

System and operation

1 System description

XP10 displays all important dive and decompression data and has a memory which stores the full dive
data. The data can be transmitted with an infrared interface (IrDA) and Dive.Log software to a Windows
personal computer.
Dive.Log software CD is included with the XP10 package. Infrared interfaces are available in PC.
SUBGEAR
XP10

2 Operation

F
On page 5 and 13 you will find an operating schematic.

2.1 Push buttons

XP10 can be operated with two push buttons (
"press" ( / ) and "press and hold (1 second)" (
At the surface:
Push buttons
Water contacts
(one located in front
and one on back,
however, inaccessible)
Under water:
Infrared port
/ • Switch on XP10 (time of day display)
• Comparable to the ENTER or RETURN key of a
keyboard
• Enter into the displayed sub menu
• Open the displayed setting
• Confirm or enter the displayed value or setting
/ • Scroll through a menu
/ • Once entered with
- Increase (
value
- Change the setting
• Switch on the backlight
• Exit the current function or menu and switch to the
time of day display
• Switch off XP10
• Access alternate displays
• Switch on the backlight
• Activate the safety stop timer
(dive mode only, in depths < 6.5m / 21ft)
II System and operation
Dive.Log
Infrared Interface
(option)
). Operation of the push buttons is divided into
/ ).
into a sub menu or setting:
) or decrease (
®
) the indicated
9