Diving In Mountain Lakes; Altitude Ranges - SubGear XP10 Mode D'emploi

If the "no-dive" warning is visible during the surface interval, the diver should not undertake
another dive.
To check the remaining desaturation time and
oxygen toxicity press
NO
DESAT
S
L
O
W
Desaturation time
Oxygen toxicity
Desaturation time is determined either by oxygen
toxicity, nitrogen saturation or the regression of
microbubbles, depending on which requires the
longer time.
If XP10 detects a situation of increased risk (due to the potential of microbubble
accumulation from previous dives or a CNS O
No-dive
will appear on the display. The duration of the no-dive warning is visible in the dive
warning
planner menu. XP10 recommends this as minimum surface interval in order to reduce
the number of microbubbles and/or to reduce the CNS O
F
You should not undertake a dive as long as the no-dive warning message is displayed
on the computer screen. If the warning is prompted by microbubble accumulation (as
opposed to CNS O
times or longer decompression times. Moreover, the duration of the no-dive warning at
the end of the dive can increase considerably.

6 Diving in mountain lakes

6.1 Altitude ranges

Altitude icon
Altitude range 2
and the current altitude range. Sea level to an altitude of approximately 1000m (3300ft) is not indicated.
In the following diagram, you can see the approximate breakdown of the altitude ranges:
Functions at the surface / Diving in mountain lakes
! WARNING
.
CNS O %
2
Residual nitrogen
bar
over 40%) and you dive anyway, you will have shorter no-stop
2
XP10 measures the atmospheric pressure every 60 seconds even while the
display is switched off. If the computer detects a sufficient increase in altitude,
it switches on automatically and indicates the new altitude range (1-4) and
the desaturation time. Desaturation time indicated at this moment refers to
adaptation time at this altitude. If the dive starts within this adaptation time,
XP10 treats it as a repetitive dive, since the body is offgassing.
Altitude is divided into five ranges, which are influenced by barometric
pressure. That is why the defined altitude ranges overlap on their fringes. If a
mountain lake is reached, the altitude range is indicated at the surface (time
of day display), in the logbook and in the dive planner by a stylised mountain
To check the elapsed surface interval
press .
Surface interval
level above 40%), the no-dive symbol
2
level below 40%.
2
27