Menu "Set 2 - SubGear XP10 Mode D'emploi

Settings

2 Menu "set 2"

With menu "set 2" or Dive.Log you can configure the following items:
Setting
• Alarm clock
• UTC zone
• Time of day
• 24 or AM/PM setting
• Date
• Display contrast
• IrDA speed (set 2 only)
• Sound
• Show XP10 electronic ID
NO
Setting the alarm clock time
Setting the UTC offset (coordinated universal time)
Adjusting the time of day
Time of day
34
Range
0 - 23h 59min, on/off
±13hrs, increments: 15min
hours:minutes
24 (off) / AM/PM (on)
1 (low) -12 (high)
low / high
on / off
Starting from the time of day display push
appears.
Confirm that you wish to enter into the menu of "set 2" by pushing
Once entered into the menu you can scroll with
the menu.
The alarm clock goes off only at the surface. "Sound" must be turned "on"
in "set 2".
1. Confirm that you wish to set the alarm time by pushing
The hours start to flash.
2. Set the hours by pushing
3. Confirm the setting with
4. Set the minutes by pushing
5. Confirm the setting with
6. "On" indicates "activated" (time of day display shows
"deactivated". Switch between "on" or "off" by pressing
7. Confirm the selected status with
This setting allows you to quickly set the watch to a new time zone without
affecting the actual time setting.
1. Confirm that you wish to set the UTC offset by pushing
The hours start to flash.
2. Set the hours by pushing
3. Confirm the setting with
4. Set the minutes in increments of 15 minutes by pushing
6. Confirm the selected status with
You can adjust it to your time zone either in this menu or using the UTC
offset (see above).
1. Confirm that you wish to adjust the time of day by pushing
The hours start to flash.
2. Set the hours by pushing
3. Confirm the setting with
4. Set the minutes by pushing
5. Confirm the setting with
Default
12:00, off
4
low
on
or
and
or .
. The minutes start to flash.
or .
. "On" or "off" starts to flash.
.
or (±13hrs).
. The minutes start to flash.
.
or .
. The minutes start to flash.
or .
.
Page
34
34
34
35
35
35
35
35
36
until "set 2"
.
through
.
), "off" indicates
.
.
or .
.