Diving With Xp10; Terminology / Symbols; General Terminology / Display During No-Stop Phase; Display During Decompression Phase - SubGear XP10 Mode D'emploi

III

Diving with XP10

1 Terminology / Symbols

The information on the display of XP10 varies depending on the kind of dive and the dive phase.

1.1 General terminology / Display during no-stop phase

Current depth
In metres (feet)
DEPTH DIVE TIME
NO STOP
CNS O %
2
Max depth
Max depth
reached during
the dive
Oxygen toxicity
CNS O %
2
Ascent rate
(Only while
ascending)
%
(Max depth
> Temperature
> (Max depth)...

1.2 Display during decompression phase

Decompression stop
All required decompression
stops must be observed.
DEPTH DIVE TIME
NO
DECO
STOP
CNS O %
2
Decompression
stop depth
Deepest stage is
displayed.
Decompression stop
duration
Prescribed duration of the
decompression stop at the
displayed decompression
stage (minutes).
No-stop phase
Dive phase during which surfacing is allowed
Dive time
without stop.
Duration of
the dive (min)
Time
Nitrogen loading
bar
No-stop time
Remaining time
at a given depth
during which ascent
is allowed without
decompression
stop (min)
26.2m Max depth
>) Temperature
, O mix and time of day
2
Time
35.7m
No-stop range
Total ascent time
Including decompression
stops in minutes.
Current depth
37min dive time
Elapsed bottom time
Total ascent time to surface (7min)
6m
Decompression
Decompression range
III Diving with XP10
Decompression phase
Dive phase during which
surfacing is allowed only
after decompression
stops are completed.
24min
No-stop time
3m
Deepest
decompression
stop depth
2min
stop duration
17