Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Adjusting the SPACING of the three pedals
- Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head (8) and
its support (7) in place.
- Select your preferred position (to the left, centered, or to the right), then replace and re-tighten the
screws so that the metal head (8) and its support (7) are held firmly in place.
Left position
Adjusting the INCLINATION of the pedals
- Using the included 2.5 mm Allen key (4), unscrew the two screws holding the metal head (8) and
its support (7) in place.
- Turn the plastic head support (7) 180°, then replace and re-tighten the screws so that the metal
head (8) and its support (7) are held firmly in place.
Less inclined position
Number of possible inclination positions per pedal:
Examples illustrating the brake pedal:
Centered position (default)
Number of possible spacing positions per pedal:
- Three for accelerator pedal
- Three for brake pedal
- Three for clutch pedal
Examples illustrating the accelerator pedal:
More inclined position (default)
- Two for accelerator pedal
- Two for brake pedal
- Two for clutch pedal
15/20
Right position
Publicité
Table des Matières
