Auto Mode; Dmx Mode; Dmx Protocol - Evolite MOVING BEAM 12x10 Mode D'emploi

o Auto Mode
From Main Menu , select the Auto mode by selecting the icon "RUN MODE" , and then you choose
one of the Auto Mode from AUTO1 to AUTO8.
For the "sound" Auto mode, select "sound" in the "RUN MODE" menu.
o DMX Mode
DMX mode is selected in the main menu (make sure fixture is not in Auto Mode).
You can control the projectors individually via your DMX-controller
Just select the fixture address, knowing that this address will be the start address. ( 1
The MOVING BEAM 12x10 provides 2 DMX modes:
1- 11 channels DMX mode
2- 15 channels DMX mode.
These 2 channels are selected in the main menu by the RUN MODE / DMX function.
Note. If 2 MOVING BEAM are addressed with same DMX value, they will move exactly the same way.
o DMX-protocol
Channel
1
2
3
4
5
6
7
8
9
10
11
12
13
MOVING BEAM 12X10 Manual Ver. 1.02
Value
Dimmer
0-255 0-100% dimmer
Red
0-255 0-100% Red
Green
0-255 0-100% Green
Blue
0-255 0-100% Blue
White
0-255 0-100% White
Built-in Dimmer
0-255 Built-in dimmer 0-100%
Pan Movement
0-255 Pan movement
Tilt Movement
0-255 Tilt movement
Pan Fine
0-255 Pan fine
Tilt Fine
0-255 Tilt fine
0-255 Pan/Tilt speed
Pan/ Tilt speed
Strobe
0-255 Strobe from fast to slowly
Built in Program
st
DMX channel).
Function
Page 16