Auto Mode; Dmx Mode; Dmx Protocol - Evolite 2R MkII Mode D'emploi

o Auto Mode
Auto mode is selected in the main menu.
The MOVING BEAM 2R provides 5 Auto modes:
1- Sound Auto Mode : Internal programs will be processed with the music detection ( built-in microphone)
4- Auto Modes : internal program will be processed automatically .
o DMX Mode
DMX mode is selected in the main menu (make sure fixture is not in Auto Mode).
You can control the fixtures individually via your DMX-controller
Just select the fixture address, knowing that this address will be the start address. ( 1
The MOVING BEAM 2R provides 2 DMX modes:
1- 15 channels DMX mode
2- 19 channels DMX mode.
These 2 modes are selected in the main menu by the Channel mode function.
Note. If 2 MOVING BEAM are addressed with same DMX value, they will move exactly the same way.
o DMX-protocol
channel
1
2
3
4
5
6
7
8
MOVING BEAM 2R MkII Manual Ver. 1.00
value
Pan movement
0-255 Pan movement
Pan Fine
0-255 Pan fine movement
Tilt movement
0-255 Tilt movement
Tilt Fine
0-255 Tilt fine movement
Pan Tilt speed
0-255 Pan/Tilt movement with increasing speed
Shutter/Strobe
0-3 Shutter close
4-251 Strobe with increasing speed
255-255 Shutter open
Dimmer
0-255 0~100% linear dimmer
Color Whell
0 White
1-10 Color 1
11-20 Color 2
21-30 Color 3
31-40 Color 4
41-50 Color 5
51-60 Color 6
61-70 Color 7
71-80 Color 8
81-90 Color 9
91-100 Color 10
101-110 Color 11
111-120 Color 12
121-130 Color 13
130-140 White
st
DMX channel).
function
Page 17