Fein ASCM18QM Mode D'emploi page 14

OBJ_BUCH-0000000371-001.book Page 14 Wednesday, February 20, 2019 9:29 AM
en
14
Removing and charging the battery
(figure 3).
Prior to the first charging procedure,
read the operating instructions of the
battery charger.
Charge the battery completely before
putting into operation for the first time.
Release the battery by pressing the battery-
unlocking button and pull the battery out of
the handle. Do not exert any force when
doing this.
Connect the battery charger to a socket out-
let, slide the battery onto the battery charger
and charge the battery. After the charging
process is over, insert the battery into the
power tool and pull the plug of the battery
charger out of the socket outlet.
A new battery does not reach its full capacity
until after several charging and discharging
procedures.
Fig. 3
Battery-Unlocking button
1.
2.
LED indication on battery
Battery