Agri-Fab 45-0546 Mode D'emploi page 10

ATTACHING SWEEPER HITCH To TRACToR
1. Place the tractor and sweeper on a flat level surface.
2. Set the sweeper height adjustment handle to about
the middle of its adjustment range.
3. Attach the sweeper to the tractor hitch, arranging the
3/4" spacers into one of the six possible combinations
shown in GROUP A and GROUP B diagrams below.
IMPoRTANT: To obtain the best performance from your
sweeper, arrange the spacers so that the sweeper bag is
approximately level with the ground and approximately 5"
to 7" off the ground as shown in figure 19.
GRoUP "A" - for vehicles with hitches
having 8" to 10" ground clearance.
8" - 10"
20.3 cm - 25.4 cm
APPROXIMATELY LEVEL
fIGURE 19
GRoUP "B" - for vehicles with hitches
having 10" to 13" ground clearance.
25.4 cm - 33.0 cm
10
10" - 13"