How to Use
This appliance is for household use only.
GETTING STARTED
•
Remove all packing materials and any stickers.
•
To register your product, go to www.prodprotect.com/russellhobbs.
•
Clean all parts as instructed in CARE and MAINTENANCE section.
PARTS
1.
Switch
2.
Battery compartment
3.
Batteries 4 x AA
(not included)
4.
Motor unit
5.
Spindle
6.
Viewing window
DISMANTLING
•
Grip around the body of the motor unit and clear viewing window.
•
Turn the cover to move the pointer from lock
•
Lift the motor unit off the grinder.
•
Remove the battery compartment by grasping around the motor unit top and
body and turning to move the pointer from lock
INSERT BATTERIES
•
For maximum performance, always use good quality batteries.
•
Fit 4 AA batteries (not included) into each motor unit.
•
The polarities ("+" and "-") are marked on the battery compartment.
FILL THE GRINDERS
•
Ensure you are using grinder quality seasoning.
•
Fill the grinders with peppercorns, sea salt, dried herbs or spices.
•
Do not overfill; this will cause problems during reassembly.
ASSEMBLING
•
Refit the motor unit to the grinder by aligning the pointer with the unlock
on the clear viewing window.
•
Rotate the motor unit moving it into the lock
•
Refit the battery compartment by aligning the pointer with the unlock
motor unit. Rotate the battery compartment moving it into the lock
ADJUST THE GRIND
•
Tip the whole mill upside down and turn the grinder clockwise towards the
negative
for a finer grind.
NOTE: Grind will become progressively finer as you rotate the grinder.
•
Tip the mill the right way up and press the switch.
•
Check the grind size and if required, readjust to suit by turning the grinder
counter-clockwise towards the positive
NOTE: Do not turn the knob more than 6 complete rotations clockwise towards the "+".
This may unscrew the knob from the spindle.
•
Do the same for the other mill.
7.
Grinder
8.
Bulb connection points
9.
Brass connection pins
10. LED Light (not pictured)
11. Clear coasters (not pictured)
(Part# RHPK4100-01)
to unlock .
to unlock .
position.
.
5
on the
position.