Listening To The Radio; Auto Tuning; After Use - Sharp CD-BA3100 Mode D'emploi

Listening to the Radio

E-17 ENGLISH
■ Sound Control (See page 11.)
1
Press the ON/STAND-BY button to turn the power on.
2
Press the TUNER (BAND) button repeatedly to select the desired
frequency band (FM or AM).
3
Press the TUNING/TIME (X or W) button to tune in to the desired
station.
Manual tuning:
Press the TUNING/TIME button as many times as required to tune in to the
desired station.

Auto tuning:

When the TUNING/TIME button is pressed for more than 0.5 seconds, scan-
ning will start automatically and the tuner will stop at the first receivable broad-
cast station.
Notes:
●
When radio interference occurs, auto scan tuning may stop automatically at
that point.
●
Auto scan tuning will skip weak signal stations.
●
To stop the auto tuning, press the TUNING/TIME button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
● "j" will appear when an FM broadcast is in stereo.
● If the FM reception is weak, press the TUNER (BAND) button to extinguish the "ST"
indicator. The reception changes to monaural, and the sound becomes clearer.

After use:

Press the ON/STAND-BY button to enter the power stand-by mode.
FM stereo mode indicator
FM stereo receiving indicator