Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Lap race procedure
038
036
1
00:17:55
00:15:62
004
000
2
F0:01:32
00:17:26
Lap race
Every time a car passes through the light barrier you will hear a
sound and one lap will be deducted from the total number of laps
for this lane (fig.
1
). The time required for the lap in this lane will
be displayed.
The race is at an end when the lap counter displays 000 for one
of the two lanes (fig.
). The lap counter will no longer respond
2
if a vehicle drives through the light barrier. If two racing cars are
competing on the last lap, the time lapse between the two will be
displayed on the lap counter.
A melody signalizes the end of the race. If you then press the Enter
button briefly, the fastest lap
will be shown on the display.
F
032
029
3
54:48:27
54:48:27
363
359
4
00:00:00
00:00:00
Time race
During the race the remaining time will be displayed (fig.
00:00:00 is reached. The lap counter will then no longer respond if
a vehicle drives through the light barrier. An acoustic signal can be
heard every time a vehicle passes through the light barrier during
a race and the number of laps displayed for this lane will increase
by one.
The race is at an end when the time counter reaches 00:00:00
(fig.
). The maximum number of laps which can be displayed is
4
999. If this number is reached in the course of a race, the counter
will reset to zero and counting will begin anew.
Cancelling a race or a further race
Press the
or
button for longer than 2 seconds. The standard
C
E
flashing display will then appear and the racing can be selected
again.
Automatic switch-off
If no car pases through the lap counter or no key is pressed for a
period of 3 minutes, the lap counter will switch off automatically in
order to save power. You can return to the Enter mode by pressing
the ON/OFF switch.
Troubleshooting
Driving tips
• By pressing the buttons
and
for a short period of time you
C
E
can select either a lap or a time race.
• Neither transmitter nor receiver may be obstructed by sections of
track or any other objects. An obstruction of the light barrier would
cause a malfunction of the lap counter.
• The lap counter may only be set up over sections of track which
are lying flat.
• In the event of any malfunctions, all four batteries must be re-
placed.
Technical specifications
) until
3
Current source:
4 x 1.2 V or 1.5 V Mignon batteries (AA/R6).
Batteries are not included in delivery.
It is not possible to use rechargeable batteries.
This device is marked by "selective sort throught" symbol related to
sort through domestic, electric and electronic, waste. This means
the product must be treated by a specialized "sorting/collecting" sys-
tem in accordance with European directive 2002/96/CE, to reduce
the impact upon environment. For more precise information, please
contact your local administration. Electronical product which are not
going through special collecting, are potentially dangerous for envi-
ronment and human health, because of dangerous substance.
Current source:
4 x 1.2 V or 1.5 V Mignon batteries (AA/R6).
Batteries are not included in delivery.
It is not possible to use rechargeable batteries.
11
Publicité
Chapitres
Table des Matières
