Electrical Connection - afriso CosiTherm BM Notice Technique

5.3

Electrical connection

ELECTRIC SHOCK
• Verify that the degree of protection against electric shock (protection class II,
double insulation) is not reduced by the type of electrical installation.
Failure to follow these instructions will result in death or serious injury.
ELECTRIC SHOCK CAUSED BY LIVE PARTS
• Disconnect the mains voltage supply before performing the work and ensure
that it cannot be switched on.
• Verify that no hazards can be caused by electrically conductive objects or
media.
Failure to follow these instructions will result in death or serious injury.
Mounting
DANGER
DANGER
 Verify that a connection
concept has been cre-
ated.
- Verify that the correct
assignment of the
switching channels for
the timer module has
been considered.
 Verify that all cables are
disconnected from power.
1. Strip the cables as shown.
BM
EN
16