afriso CosiTherm BM Notice Technique page 55

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Mounting
1. Open/remove the cover of the
cabinet.
2. Drill a hole into the inside of the
cabinet using a power drill.
3. Route the cable through the
drilled hole and screw the connec-
tion of the adhesive antenna to
the wireless module for timer
module.
4. Remove the protective film from
the adhesive antenna and push
the adhesive antenna onto the
outer edge of the cabinet.
5. Close the cover of the cabinet.
EN
23
BM

Publicité

Table des Matières
loading

Table des Matières