afriso CosiTherm BM Notice Technique page 43

Parameter
Supply voltage
Nominal voltage
Nominal power
(base module only)
Mains fuse
Relay load
Permissible 
cable type
The following components may be connected to one product
Controller modules D6
(6 x)
Controller modules D2
(2 x)
Total number of control circuits
Total number of thermal actuators Max. 72 *
Electrical safety
Protection class (EN 60730-1)
Degree of protection (EN 60529)
*) Note
AFRISO recommends the use of AFRISO actuators to ensure optimum sys-
tem performance. If actuators from other manufacturers are used, the fol-
lowing limit values must be met:
Operating voltage
Ma. operating current
Max. inrush current
Max. operating power
Special characteristic
Actuators of other manufac-
turers connected per control
circuit
Product description
Value
AC 230 V, 50 Hz to 60 Hz
1 VA
T 10 A
Max. 230 V, max. 2 A, power factor > 0.6
H03 VV-H2-F 2 x 0.75 mm²
Max. 3
Max. 9
Max. 18
II
IP 20
AC 230 V ±10 %, 50/60 Hz
9 mA
140 mA / 200 ms
Short-circuit proof, protected against
overvoltage
Max. 2
2 W
BM
EN
11