5.7.3
Magnetic foot antenna
1. The cable of the magnetic foot antenna can be installed on-wall or in-
wall.
- Due to the rather complex installation, this antenna is mainly recom-
mended for major renovation projects or new buildings.
Mounting
3. Screw one end of the coaxial
cable to the wireless module for
timer module.
4. Remove the nut at the other end
of the coaxial cable and push the
connection through the drilled
hole.
5. Fit the nut from the outside.
6. Close the cover of the cabinet.
7. Screw on the antenna (angular
SMA connector).
Transmission power gain: 3 dbi
EN
25
BM