Electrical Connection - afriso PrimoTherm Mode D'emploi

5.8

Electrical connection

ELECTRIC SHOCK
• Verify that the degree of protection against electric shock (protection class,
double insulation) is not reduced by the type of electrical installation.
Failure to follow these instructions will result in death or serious injury.
ELECTRIC SHOCK CAUSED BY LIVE PARTS
• Disconnect the mains voltage supply before performing the work and ensure
that it cannot be switched on.
• Verify that no hazards can be caused by electrically conductive objects or
media.
Failure to follow these instructions will result in death or serious injury.
ELECTROSTATIC DISCHARGE
• Always earth yourself before touching electronic components.
Failure to follow these instructions can result in equipment damage.
1. Connect the circulation pump and the actuator in accordance with the
instructions of the manufacturer.
Mounting
DANGER
DANGER
NOTICE
PrimoTherm®
EN
25