Delta MultiChoice 13 Serie Manuel Du Propriétaire page 6

13 / 14 Series Installation
Cartridge Installation
2
A.
1
• Turn off water supplies.
• Remove cover (1) and bonnet nut (2)
from the body, if necessary.
• IF THIS IS NOT A THIN WALL
MOUNTING, the entire plasterguard (3)
may be removed.
Back to back Installation
Normal Installation (changes not required)
Reverse
Installation
FOR BACK TO BACK OR REVERSE
INSTALLATIONS (hot on right and cold
on left) insert the cartridge with the "hot
side" on the right.
72264 Rev. G
3
2
Cold
Hot
B.
2
4
1
• Rotate the cartridge (1) so the words
"hot side" (2) appear on the left.
• Insert cartridge into valve body as
shown.
• Make sure the cartridge tubes and O-
rings (3) are properly seated in holes at
the base of the body.
• Ensure the keys on the body are fully
engaged with the slots in the body (4).
C.
• Slide bonnet nut (1) over the cartridge
and thread onto the body.
• Hand tighten securely.
6
3
1
4