Trim Installation - Delta MultiChoice 13 Serie Manuel Du Propriétaire

13 / 14 Series Installation

Trim Installation

5
A.
1
• Slide O-ring (1) over cartridge and
the bonnet nut (2). The O-ring, which
acts as a spacer to steady the sleeve,
should rest behind the bonnet nut.
C.
1
4
• Secure the escutcheon (1) and backplate
(2) (if your model has one) to the bracket
(3) using the 2 screws provided (4).
• Do not overtighten escutcheon screws.
72264 Rev. G
2
3
2
B.
2
IF YOUR MODEL REQUIRES A
SPACER (1):
• Insert it into the sleeve (2) and push it
to the front.
• Slide the sleeve over the cartridge,
body and O-ring.
D.
• Using an Allen wrench to secure the set
screw, install the handle onto the stem.
10
1
1