SPORTSTECH HGX100 Manuel page 46

STEP 12
A. Attach the 3250 mm Upper cable (39#) through the opening of the upper frame , Make sure the ball stopper should be in front
of the upper frame, Place 1PC Pulley (74#) below the cable and secure the 1st pulley using 1PC M10 × 45 Allen bolt (94#) ,2PC
ø10 washer (105#) and 1pc M10 Aircraft nut (103#).
B. Draw the cable backwards and place the 2st pulley below the cable , Secure the pulley with the same way in A.
C. Draw the cable around the pulley and front , Place the 3st pulley below the cable and secure it with 1PC M10×160 Allen bolt
(100#), 2PC ø10 washer (105#) and 1pc M10 Aircraft nut (103#).
D. Draw the cable around the pulley and backwards,Place the 4st pulley below the cable and secure it with the same way in A.
E. Draw the cable around the pulley and downwards,Place the 5st pulley below the cable, Secure the pulley with 1pc M10*50 Allen
bolt(95#), 2PC ø10 washer (105#) ,2pcs bushing (44#),double floating pulley bracket (30#),and 1pc M10 Aircraft nut (103#).
F. Draw the cable around the pulley and upwards ,Place the 6st pulley below the cable and secure it with 1pc M10*65 Allen bolt
(93#),2pcs bushing (41#) and 1 pc M10 Aircraft nut(103#).
G. Draw the cable around the pulley and downwards,Thread the end of the upper cable to the top opening of the selector rod at
least 5 laps to keep safe.
103
105
105
103
105
105
103
103
105
105
103
103
105
105
103
100
105
105
3250
46