Calibration Function; Flips And Loops; Headless Function - Carson X4 Quadcopter 150 Sport Consignes De Sécurité

CALIBRATION FUNCTION

FLIPS AND LOOPS

Use the trim buttons to do flips/loops.
The buttons specify the direction of the flips.

HEADLESS FUNCTION

The headless function allows for a more simplified control of the
Quadcopter, where all control commands use the position of the
pilot as their reference point. Therefore, the Quadcopter always
operates from the pilot's perspective, i.e. left and right cannot be
swapped around when the model turns.
This simplification makes the control much easier for beginners.
Re-calibrate your Quadcopter.
• Place the model on a level surface
• Move the left joystick to the right and down (fig.)
• At the same time, move the right joystick repeatedly to the right
and the left (fig.)
• Blue LEDs flash / calibration is completed
activate Headless Mode:
• After switch on, the standard control function is always activated.
• Press the trim buttons at the same time / blue LEDs flash
• Headless function is activated
De-activate Headless Mode:
• Press the trim buttons at the same time / blue LEDs extinguish
• Headless function is de-activated
Front
Left Right
Back
Back
Left Right
Front
19 // GB