Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
1.
Safety instructions
For skilled electricians and
trained personnel in accordance with
national legislation, including the relevant
standards and, where applicable, in acc.
with IEC 60079-17 on electrical apparatus
for explosive atmospheres.
– The portable searchlight must not be
used in zone 0/20 hazardous areas!
– The temperature class marked on the
portable searchlight is to be observed!
– The portable searchlight may only be
opened or charged outside of
"hazardous areas"!
– Modifications to the lamp or changes
of its design are not permitted!
– The searchlight shall only be used for
its intended purpose and in perfect
condition!
– For replacing components, only
genuine Cooper Crouse-Hinds GmbH
(CCH)/CEAG spare parts may be used!
– Repairs that affect the explosion
protection, may only be carried out by
CCH/CEAG or a qualified "electrician"!
– Prior to initial operation, the portable
searchlight must be charged in
accordance with the instructions
included in section 6!
– Lamps fitted with NiMH accumulators
must not be stored without a recharge
for more than 6 months!
– Pull the mains plug prior to opening
the lamp (only SEB 9 L)!
Observe the national safety rules and
regulations for prevention of accidents as
well as the following safety instructions
which are marked with an ( ) in these
operating instructions!
3. Conformity with standards
This explosion protected portable searchlight
is conform to the standards specified in the
EC-Declaration of conformity enclosed
separately.
– the EC directive "Equipment and protective
systems intended for use in potentially
explosive atmospheres,
– DIN 14642 for explosions protected hand
lamps with motor vehicle charger for
installation within vehicles of the fire
brigade,
– DIN EN 1846-2 "fire-fighting vehicles - Part
2: General requirements" with the shock
test according to EN 60068-2-27 ,
– 94/9/ EC and "Electromagnetic compatibili-
ty"
(2004/108/EEC) as well as 72/245/EEC and
– 95/54/EC (e1-certificate).
It has been designed, manufactured and tested
according to the state of the art and to
DIN EN ISO 9001:2008 and
EN ISO/IEC 80079-34:2011.
8
Explosion protected portable searchlight
SEB 9, SEB 9 L
2.
Technical data
EC type sample test certificate
Category of application and directive
EC Type approval accc. guideline 95/54/EC EMV
in vehicles
Lamps to be fitted
Main lamp (halogen lamp with double bulb)
Pilot lamp
Rated voltage for charging
of the SEB 9 L lamp
Duration
Main lamp
Main beam flashlight
Pilot light
Battery
SEB 9/SEB 9 L
Indication of the charging state and capacity
Recharge period for rated duration
Permissible ambient temperatures
in general
Specified data kept at battery temperature
Storage in original packing
briefly <1 month
Protection category to EN/IEC 60529
Insulation class to EN 60598 during
the charging process
with battery operation
Geometrical data of the lamp
Weight
SEB 9 L
SEB 9
This portable searchlight is suitable for use
in zone 1, 21, 2 and 22 hazardous areas acc.
to IEC 60079-10-1 /-2.
4.
Description and application
There are two versions of the explosion
protected portable searchlight available.
The SEB 9/SEB 9 searchlight is designed for
charging in the LG 443 charger (Order No.:
1 1540 000 443) or in the motor vehicle charger
90 (Order No.: 1 1145 000 792). The SEB 9 L
seachlights contains an additional charger unit
inside of the lamphead and can be charged
useing the built-in line cord directly at 230 V
supply.
The portable searchlight is composed of two
functional units:
1. Lamphead (fig. 1)
2. Battery container (fig. 2).
The lamphead is hinged to the battery container
and can therefore be swivelled.
A rotary switch (fig. 1, item 1) with 5 switch
positions is arranged below the carrying handle.
= service
= pilot light (bypass)
0
= OFF
= main beam
= flashing main beam
EATON's Crouse-Hinds Business
BVS 09ATEX E005
D II 2 G Ex e ib IIC T4 Gb
D II 2 D Ex tb IIIC T85°C Db IP65
03 5969
5.5V/5.5W BA 15 d cap
Order No.:1 2061 000 040
4.8V/1.5W, BA 9s cap
Order No.:1 2041 000 040
230 – 250 V +/- 10%, 50/60 Hz
(with integrated charging connection)
approx. 7 ,0 h
approx. 29 h
approx. 28 h
4 NIMH- 4,8 V 9.5 AH (2 1147 791 000)
see fig. 3 and 4
up to 20 h, dependent on the residual capacity
-20°C to +40°C
0°C to +30°C
5°C to +35°C
-20°C to +40°C
IP65
II
III
see fig. 7
approx. 2.5 kg
approx. 2.2 kg
An LED indicating the charging state and
capacity (fig. 1, item 2) is laterally arranged on
the lamphead.
A swivelling pocket containing the slip-on
filters is locked in on the back of the lamphead
(fig. 1, item 3/5).
By turning the pocket, the charging lead is
accessible (fig. 1, item 4).
Max. three slip-on filters (diffusing lenses) can
be kept in the pocket.
On the bezel ring there are located spring-
loaded cams (fig. 1, item 7) into which one
slip-on filter can be inserted (Mind: Insert from
one side only).
By turning the bezel ring (apx. 2 turns), the light
beam can be adjusted from short to long range
(fig. 1, item 6). The swivel ling lamphead can be
adjusted through apx. 100° (fig. 1).
In order to increase the stability of the portable
searchlight, a slide provided on the bottom of
the battery container can be backwards pulled
out (fig. 2, item 1).
Safety functions of the portable searchlight:
The series SEB 9 portable searchlights feature
some functions that make their use simple and
safe.
E
Publicité
Table des Matières
