Mount The Rk12Walloa On A Wall - StarTech RK12WALLOA Mode D'emploi

Mount the RK12WALLOA on a wall

Warning! Remove all equipment from the wall-mount rack before you attempt to
mount it on a wall.
Warning! Wall structures vary and it is important to make sure that the type of
wall structure and mounting hardware that you are using will properly support the
mounted equipment. Failure to do so might result in personal injury and/or equipment
damage. The wall structure should be capable of supporting at least four times the
weight of the mounted equipment.
The RK12WALLOA can hold up to 200 lb. (90 kg) in weight. Without any equipment
added to it, the RK12WALLOA weighs 20 lb. (9.5 kg).
Warning! If you lack the necessary expertise to attach this product to the wall that
you're using, contact a construction professional to install the wall-mount rack or to
provide specific mounting instructions for your wall structure.
1. Use the four wall-mount holes in both of the rear horizontal brackets as a template
to mark the wall where you want to hang the wall-mount rack.
2. Follow the appropriate steps for the type of wall that you're using and attach the
wall-mount rack to the wall.
Instruction manual
7